<div class="descriptioncontent">
<h1>ELECTRICAL TERMS AND CONDITIONS</h1>
<ul>
<li style="padding-bottom: 3px;">All equipment, regardless of source of power, must comply with National Electrical Code, all Federal, State and local safety codes.</li>
<li style="padding-bottom: 3px;">The use of clip-on sign sockets, latex or lamp cord wire in displays, or the use of 2-wire clamp on fixtures, is prohibited by order of fire prevention bureaus at trade shows and conventions.</li>
<li style="padding-bottom: 3px;">Permanent building electrical outlets are not a part of booth space and are not to be used by exhibitors unless specified otherwise.</li>
<li style="padding-bottom: 3px;">All material and equipment furnished by the Convention Center for this service order shall remain the property of the Atlantic City Convention Center and shall be removed only by the Convention Center Electricians at the close of the show. Any material removed by exhibitors will be added to the invoice and billed to the card on file.</li>
<li style="padding-bottom: 3px;">Unless otherwise directed, Convention Center Electricians are authorized to cut floor coverings to permit installation of service.</li>
<li style="padding-bottom: 3px;">All wiring must have 3-wire grounded cord with a minimum of #14 gauge. Zip cords or two-wire cords are ungrounded and could result in safety hazards. Their use is forbidden in all convention facilities.</li>
<li style="padding-bottom: 3px;">The Atlantic City Convention Center reserves the right to refuse connection to any exhibitor whose equipment is deemed unsafe by Convention Center.</li>
<li style="padding-bottom: 3px;">Tipping is not permitted. Any requests from personnel for gratuities should be immediately reported to Atlantic City Convention Center Management.</li>
<li style="padding-bottom: 3px;">No credits will be issued on unused services installed as ordered.</li>
<li style="padding-bottom: 3px;">Disputes will not be considered unless filed by the exhibitor prior to close of show.</li>
</ul>
<h1>ELECTRICAL LABOR RULES AND RATES FOR OUTLET DISTRIBUTION AND CONNECTION</h1>
<ul>
<li style="padding-bottom: 3px;">Labor rates are subject to labor contract effective at time of show.</li>
<li style="padding-bottom: 3px;">Straight time labor will be charged for installation services provided Monday through Friday 8:00am-4:30pm. All other hours will be billed at overtime rates.</li>
<li style="padding-bottom: 3px;">Electrical Labor Rates: $110.00 per hour - Regular Time / $220.00 per hour - Overtime. Labor is billed in half-hour increments with a minimum of one hour.</li>
<li style="padding-bottom: 3px;">Dismantle labor is half that of total installation time. This service will be billed at the tear out rate of $163.00 per hour. Shows closing on Sundays and Holidays will be billed at overtime rates.</li>
<li style="padding-bottom: 3px;">Forklift Rates: prevailing labor rates (one hour minimum) plus $275.00 lift rental.</li>
<li style="padding-bottom: 3px;">Boom Lift Rental: Prevailing Labor Rates (one hour minimum) plus $500.00 lift rental.</li>
<li style="padding-bottom: 3px;">Starting time can only be guaranteed when labor is requested for the start of the work day at 8:00am. The minimum charge per booth is one hour for installation and one-half (1/2) hour for dismantle. Time will commence per exhibitor’s request. Failure to start labor at requested time will result in a one hour charge per electrician requested, unless 24-hour advance notice is provided in writing.</li>
</ul>
<h1>OUTLET LOCATION & DISTRIBUTION</h1>
<ul>
<li style="padding-bottom: 3px;">All 110 volt electrical outlets will be installed on the floor at the draped back wall of In-Line and Peninsula Booths unless otherwise ordered by the exhibitor.</li>
<li style="padding-bottom: 3px;"><span style="color: #ff0000;"><strong>All Island / Bulk Spaces require a floor plan indicating location. There is an additional labor charge for this service.</strong></span></li>
<li style="padding-bottom: 3px;">Any additional power locations are chargeable on a time and material basis.</li>
<li style="padding-bottom: 3px;">All services larger than 100 amps may be subject to an additional labor charge.</li>
<li style="padding-bottom: 3px;">All overhead services will require lift, labor and materials. Call for quote.</li>
</ul>
<h1>ACCC ELECTRICAL JURISDICTON</h1>
<p>(Requires labor and/or material)</p>
<ul>
<li style="padding-bottom: 3px;">All under-carpet distribution of electrical wiring.</li>
<li style="padding-bottom: 3px;">All power distribution, light hanging or general labor in any space larger than 200 sq. ft.</li>
<li style="padding-bottom: 3px;">All facility overhead distribution of electrical wiring, including HDMI cable, fiber optics, twisted pair, etc. The distribution of same from product to booth and from booth to booth.</li>
<li style="padding-bottom: 3px;">All connections requiring 208 volts and above.</li>
<li style="padding-bottom: 3px;">All motor and equipment hook-ups requiring hard wired connections.</li>
<li style="padding-bottom: 3px;">Installation and/or repair of electrical fixtures.</li>
<li style="padding-bottom: 3px;">Installation of all computers.</li>
<li style="padding-bottom: 3px;">All electrical signs, headers and monitors.</li>
<li style="padding-bottom: 3px;">Labor is required to inspect pre-wired equipment plugged into our system.</li>
</ul>
<h1>PLUMBING LABOR</h1>
<ul>
<li style="padding-bottom: 3px;">Straight time labor will be charged for installation services provided Monday through Friday 8:00am-4:30pm. All other hours will be billed at overtime rates.</li>
<li style="padding-bottom: 3px;">Plumber Labor Rates: $85.00 per hour - Regular Time / $170.00 per hour - Overtime. Labor is billed in half-hour increments with a minimum of one hour.</li>
<li style="padding-bottom: 3px;">Dismantle labor is half that of the total installation labor. Shows closing on Sundays and Holidays will be billed at overtime rates.</li>
<li style="padding-bottom: 3px;">Gas Lines and labor will be charged from point of attachment to inside of booth.</li>
<li style="padding-bottom: 3px;">Official Show Plumber will make all interconnections between exhibitor owned machines/equipment.</li>
<li style="padding-bottom: 3px;">All plumbing connections require labor. These charges will be applied to the card on file.</li>
</ul>
<h1>COMPRESSED AIR</h1>
<ul>
<li style="padding-bottom: 3px;">The Official Show Plumber will not be responsible for moisture or water in air line. Exhibitor should supply their own filter or other equipment to handle moisture or water.</li>
<li style="padding-bottom: 3px;">The Official Show Plumber requires fifteen (15) days notice if special regulators and/or filters need to be ordered. Rental charges apply. Call for quote.</li>
<li style="padding-bottom: 3px;">Compressed air lines are 1/4”, 1/2” and 3/8”. Any other size is considered a special request. Call for quote.</li>
<li style="padding-bottom: 3px;">Air is available during show hours only. There will be an additional charge for use after hours. Call for quote.</li>
<li style="padding-bottom: 3px;">All connections must be made by the Official Show Plumber.</li>
<li style="padding-bottom: 3px;">ANY COMPRESSOR THAT IS NOT AN INTERNAL/PERMANENT PART OF YOUR MACHINE IS NOT PERMITTED IN FACILITY.</li>
</ul>
<h1>WATER LINES AND DRAINS</h1>
<ul>
<li style="padding-bottom: 3px;">Water and drain lines are priced by the foot; depending on location of booth and distance from plumbing service. 25 feet of line is included in the initial cost. Additional footage may be necessary in order to reach your booth and to avoid crossing aisles.</li>
<li style="padding-bottom: 3px;">Standard water lines are 1/4”, 3/8”, 1/2” and 3/4”. Any other size is considered a special request. Call for quote.</li>
<li style="padding-bottom: 3px;">Certain types of installations may require additional labor.</li>
<li style="padding-bottom: 3px;">Ramping will be available on a time and material basis.</li>
<li style="padding-bottom: 3px;">All connections must be made by The Official Show Plumber.</li>
<li style="padding-bottom: 3px;">HAND CARRYING OF WATER IS PROHIBITED IN THE FACILITY.</li>
</ul>
<h1>PLUMBING TERMS AND CONDITIONS</h1>
<ul>
<li style="padding-bottom: 3px;">All equipment must comply with all Federal, State and local safety codes.</li>
<li style="padding-bottom: 3px;">Disputes will not be considered unless filed by the exhibitor prior to close of show.</li>
<li style="padding-bottom: 3px;">All materials and equipment furnished by the Convention Center for this service shall remain the property of the Convention Center and shall be removed only by the Convention Center Plumbers at the close of the show. Any ma- terial removed by exhibitors will be added to the invoice and billed to the card on file.</li>
<li style="padding-bottom: 3px;">Air and water pressures may vary and no guarantees can be made of minimum or maximum pressures. If the pres- sure is critical, exhibitors should arrange to have a pressure regulation valve installed.</li>
<li style="padding-bottom: 3px;">Unless otherwise directed, Convention Center Plumbers are authorized to cut floor coverings to permit installation of service.</li>
<li style="padding-bottom: 3px;">Credit will not be given for any services installed and not used.</li>
<li style="padding-bottom: 3px;">Tipping is not permitted. Any requests from personnel for gratuities should be immediately reported to Atlantic City Convention Center Management.</li>
</ul>
</div>